Kitchen Remodel Cost In Palm Beach (From $10k–$220k+)

Quick Overview: Kitchen Remodel Cost In Palm Beach

Cost Ranges By Project Type

These numbers already reflect Palm Beach realities: coastal labor rates, hurricane codes, quartz at $70–$150 per square foot, and premium hardware that can survive salt air.

What Each Kitchen Remodel Level Includes

Knowing the label (“mid-range” or “high-end”) is less useful than knowing what is actually included.

Minor Kitchen Remodel ($10,000–$20,000)

A minor remodel is a refresh, not a re-think. 

Typical scope:

• Painting existing cabinets instead of replacing them

• New cabinet hardware and fixtures

• New backsplash tile in standard patterns

• Lighting swaps and maybe a new faucet

• One or two appliance upgrades (often range and dishwasher)

No walls move. Plumbing stays in place. Electrical work is minimal. This level makes sense when the layout works, the bones are fine, and you just need the space to stop feeling tired.

Mid-Range Kitchen Remodel ($25,000–$70,000)

This is where many Palm Beach primary kitchens land.

Scope usually includes:

• Semi-custom cabinetry with better storage and internal organization

• Quartz or other mid-range stone counters

• New flooring (LVP or porcelain tile) in the kitchen zone

• Updated appliance package in the $6,000–$12,000 range

• New lighting plan (recessed + pendants + under-cabinet)

• Moderate plumbing and electrical upgrades within a similar layout

You are not rebuilding the house, but you are doing real work under the surface, especially in older homes that need GFCI outlets, better ventilation, and cleaner plumbing runs.

High-End Kitchen Remodel ($70,000–$110,000+)

High-end is where the millwork, appliances, and surfaces start feeling custom to the home instead of just “new.”

Typical characteristics:

• Custom cabinetry

• Premium or panel-ready appliance package ($15,000–$30,000+)

• Imported stone or porcelain slab countertops

• Strong ventilation strategy with a proper hood and ducting

• More aggressive layout changes – larger island, extended runs, better work triangle

At this level, design decisions matter as much as line items. A single appliance choice or stone selection can move the budget by five figures.

Full Gut Kitchen Remodel ($100,000–$130,000+)

A full gut means you are starting over, usually in an older Palm Beach home.

Scope typically includes:

• Full demolition back to framing

• New rough plumbing and electrical throughout the kitchen

• New drywall, insulation, and often upgraded subflooring

• New cabinetry, counters, flooring, lighting, appliances – everything

• Potential structural tweaks (headers, widened openings) as needed

This is the moment to deal with cast iron plumbing, overloaded panels, and any latent code issues. It is more expensive up front, but often makes more sense than layering new finishes over old problems.

Luxury / Custom Kitchen ($130,000–$220,000+)

At the top end, the kitchen becomes a fully customized space with every surface and detail considered.

Common elements:

• Ultra-premium custom cabinetry, often with bespoke millwork and integrated storage

• Luxury / pro-level appliances (Sub-Zero, Wolf, Miele, Thermador) in the $30,000–$70,000+ range

• Marble or other luxury stones, sometimes mixed with porcelain slabs

• Smart lighting and appliance integration, custom hood, coffee and wine stations

• Strong architectural moves: re-framed openings, new impact windows or doors, reworked ceiling lines

In higher-end properties, this is often the standard rather than the exception.

Kitchen Remodel Labor Costs

Labor is where the local market really shows up. Two kitchens with identical materials can land in different places purely based on complexity and trade time.

Plumbing Labor

• Hourly rate: $45–$120

• Typical full kitchen plumbing scope: $2,000–$6,000

That covers rough-in, new supply and waste lines where needed, and final fixture connections. Costs climb quickly when you move sinks, dishwashers, or add a prep sink on the island.

Electrical Labor

• Hourly rate: $50–$110

• Typical kitchen electrical scope: $1,200–$4,000

A dialed-in kitchen lighting plan – recessed cans, pendants, under-cabinet lighting, dedicated appliance circuits, upgraded panel capacity – sits firmly in this bucket. Older homes often need more panel work than expected.

Demo, Drywall, Paint, Flooring & Tile

• Demo: $5–$10 per sq ft

• Drywall and paint: $5–$10 per sq ft (hang, finish, prime, paint)

• Flooring installation: $5–$12 per sq ft depending on material

• Backsplash tile labor: $8–$15 per sq ft

Intricate tile patterns, tricky substrates, and awkward existing framing all push these numbers toward the upper end of the range.

Cabinet & Appliance Installation

• Cabinet installation: $40–$75 per linear foot or 12%-20% of the overall cost of cabinetry materials

• Appliance installation: $200–$500 per appliance

Panel-ready fridges, built-in ovens, and custom hoods are slower, more precise installs, and that is reflected in the labor.

Materials: Where Two Similar Layouts End Up On Different Planets

Once labor is accounted for, materials are where style, durability, and cost all collide.

Cabinetry

• Stock: $150–$450 per linear foot

• Semi-custom: $450–$900 per linear foot

• Custom: $900–$1,500+ per linear foot

Door styles, internal organizers, soft-close hardware, and coastal-resistant materials all add to the cabinet line. Most Palm Beach kitchens end up at least in the semi-custom tier.

Countertops and Surfaces

• Quartz: $70–$150 per sq ft installed

• Natural stone (marble, granite): $100–$250+ per sq ft

• Ultra-luxury and exotic stones: $250–$500+ per sq ft

Quartz is popular for durability, but many higher-end homes mix stone on the island with more forgiving surfaces on the perimeter to balance cost and maintenance.

Backsplash and Flooring Materials

Backsplash:

• Ceramic tile: $3–$10 per sq ft

• Porcelain tile: $7–$20 per sq ft

• Natural stone tile: $15–$50+ per sq ft

Flooring:

• LVP: $3–$7 per sq ft

• Porcelain tile: $7–$20 per sq ft

• Hardwood / engineered wood: $8–$20+ per sq ft

In humid, coastal kitchens, porcelain and high-quality LVP tend to win the practicality argument over traditional hardwood.

Appliances, Fixtures & Lighting

Appliances:

• Mid-range package: $6,000–$12,000

• High-end package: $15,000–$30,000

• Luxury / pro-level: $30,000–$70,000+

• Panel-ready premium: +$2,000–$5,000+

Plumbing Fixtures:

• Basic: $200–$500 per fixture

• Mid-range: $500–$1,000 per fixture

• High-end: $1,000–$3,000+ per fixture

Lighting:

• Standard fixtures: $100–$500

• Designer or smart fixtures: $500–$2,000+

One of the fastest ways to overshoot the original kitchen remodel cost is quietly upgrading every appliance and fixture mid-project. This is where clear allowances up front make life easier.

Premium Features & Add-Ons

Not every kitchen needs these, but many Palm Beach projects include at least one.

• Walk-in pantry construction: $7500–$10,000+

• Custom hood vents: $1,500–$5,000+

• Wine fridges / beverage stations: $1,500–$8,000+

• Built-in coffee systems: $1,000–$8,000+

• Smart home integration (lighting / appliances): $2,000–$8,000+

• Outdoor kitchen tie-ins: $5,000–$15,000+

Each of these needs both a budget line and a design decision early. Retro-fitting a walk-in pantry after the cabinets are ordered is never fun.

Structural & Layout Changes

Layout changes are often worth it. They are also where budgets move the most.

Moving Plumbing and Gas

• Plumbing relocation: $600–$1,800 per fixture

• Typical kitchen plumbing scope with moves: $3,000–$8,000

• Gas line relocation: $800–$2,500

That island sink or new gas range wall may be exactly what the kitchen needs – it just lives in a different cost category from a straight swap.

Electrical Rework

• Electrical circuit relocation: $200–$600 per circuit

• Full kitchen circuit rework: $1,200+

Once you add under-cabinet lighting, more outlets, and dedicated circuits for each major appliance, the electrical portion starts to look more serious.

Walls, Windows & Islands

• Load-bearing wall alteration: $8,000–$25,000+ (including engineering and permits)

• Adding or enlarging impact window: $1,500–$4,000+ per window

• Adding an island:

  • Without plumbing/electrical: $3,000–$7,000

  • With plumbing/electrical: $8,000–$20,000+

• Footprint expansion or opening up spaces: $150–$300+ per sq ft

These changes are often the difference between a kitchen that feels slightly updated and one that works for how you live. The key is deciding them early, not during framing.

Palm Beach–Specific Premiums

You can value-engineer finishes. You cannot value-engineer the building code.

Impact Windows and Doors

• Impact windows: $800–$1,400 per window installed or $50–$75 per sq ft

• Impact doors (sliders, French): $2,000–$5,500+ installed

For most substantial projects, impact products are non-negotiable for permitting, insurance, and long-term resilience.

Hurricane, Flood & Waterproofing

• Hurricane tie-downs and structural reinforcements: $1,000–$3,000+

• Flood zone elevation or proofing (when triggered): $15,000–$50,000+

• Coastal waterproofing premiums: 20–30% higher than inland standards

• Salt-resistant materials: 10–20% premium on paints, fasteners, and exterior-adjacent finishes

These are the less glamorous line items that keep the house safe and insurable.

Potential Hidden Conditions

Typical hidden condition ranges:

• Mold remediation: $1,500–$6,000+

• Termite damage repair: $3,000–$15,000+

• Cast iron plumbing replacement (kitchen run): $5,000–$12,000

• Electrical panel upgrade: $1,500–$4,500

• Subfloor repair: $500–$5,000

• HVAC modifications: $2,000–$7,000+

Permits, Design & Other Soft Costs

These are the costs that do not sit on the tile order but absolutely shape the total kitchen remodel cost.

Permits and Engineering

• Building permits: $700–$3,000+ depending on valuation and scope

• Electrical and plumbing permits: $150–$500 each

• Structural engineering (for wall removals): $500–$2,000+

• Permit expediting: $2,000–$4,000

Skipping proper engineering or trying to "wing it" on loads is how you end up with red tags and delays.

Design, HOA & Possible Hazard Testing

• Architectural / design fees: 7–15% of construction cost or $2,000–$10,000+

• HOA review timelines: 4–8+ weeks before permits

• Hazard testing (asbestos, mold, lead): $5,000–$15,000+ where relevant

By the time you add design, engineering, permits, and testing together, soft costs can easily hit five figures on anything beyond a basic refresh.