Cost of Custom Cabinets in Palm Beach ($25,000+)
Dec 15, 2025
Palm Beach custom cabinets sit in a category of their own.
Materials, finishes, fabrication methods, and installation conditions each carry their own pricing, and understanding those pieces makes the overall cost far easier to evaluate.
We’ll break down the typical ranges and what usually drives them in local projects.
Key Notes
Custom cabinets range from $500 to $2,500+ per linear foot installed.
Labor, installation conditions, and on-site modifications add major cost variation.
Electrical, plumbing, wall repair, and appliance panels are common supporting expenses.
Quick Price Snapshot
Core Price Bands Per Linear Foot
For custom cabinets in Palm Beach, realistic installed prices for custom cabinets usually fall into these bands:
Entry-Level Custom: $500–$700 per linear foot
Mid-Range Custom: $700–$1,000 per linear foot
High-End Custom: $1,000–$1,500 per linear foot
Ultra Luxury / Fully Bespoke: $1,500–$2,500+ per linear foot
These ranges assume proper cabinet boxes, finished faces, basic hardware, shop finishing, and standard installation in a typical Palm Beach kitchen.
They do not assume rare woods, specialty finishes, or complex on-site conditions.
Typical Full Kitchen Custom Cabinet Budgets
Using a standard kitchen of around 20–25 linear feet:
Smaller or Simple Custom Kitchens: Roughly $25,000–$35,000
Most Mid-Range Custom Kitchens: Roughly $35,000–$70,000
High-end and Larger Layouts: Often $65,000–$110,000+
Ultra Luxury Or Multi-Space Projects: $90,000–$180,000+
The upper ranges usually include full-height pantries, appliance walls, integrated panels, and extra built-ins such as bar areas, mudroom storage, or office cabinetry.
Style & Finish Choices: How Design Decisions Move The Number
You can spec “white custom cabinets” three different ways and get three very different numbers back. Style and finish are a big part of that.
Cost By Door Style
Typical Palm Beach ranges per linear foot (cabinetry plus fabrication and finish):
Shaker: $700–$1,200 per linear foot
Slab (Flat Front): $800–$1,200 per linear foot
Beadboard: $600–$1,000 per linear foot
Applied Molding / Raised Panel: $800–$1,500 per linear foot
Shaker remains the go-to choice and sits in the middle to upper end because people expect good materials and crisp finishing.
Slab can be more cost-effective in simple lacquer or veneer, and raised panel with applied moldings tends to be the priciest because it demands more joinery and finish work.
Cost By Finish Type
Finish is where a lot of the premium shows up:
High Gloss Lacquer: $1,000–$1,800 per linear foot
Matte Lacquer: $900–$1,400 per linear foot
Wood Veneer (Custom Grade): $850–$1,500 per linear foot
Solid Hardwood Fronts: $1,200–$2,000+ per linear foot
Specialty Finishes (Hand-Glazed, Wire-Brushed, Cerused): $1,300–$2,200+ per linear foot
High gloss lacquer and specialty finishes are labor-heavy. They need more prep, controlled spray environments, and extra quality control. That is why the same door profile can jump significantly in price when you change the finish specification.
Material Choices Behind The Doors (Boxes, Cores, Hardware)
Two cabinet quotes can look similar on paper while using very different core materials.
Box Construction Costs
Typical Palm Beach ranges:
Marine Grade Plywood: $18–$24 per square foot
Standard Cabinet-Grade Plywood: $11–$16 per square foot
MDF: $10–$14 per square foot
Marine-grade plywood is common in kitchens that sit closer to the coast, or in homes where insurance or code pushes toward higher moisture resistance.
Standard plywood is used widely and is a solid baseline in most interiors. MDF is usually reserved for painted doors and panels, and needs careful sealing in this climate.
Facing Materials
For doors, drawer fronts, and exposed end panels:
High-Grade Hardwoods (Oak, Maple, Walnut): $22–$50 per square foot
Exotic Hardwoods (Rift Cut White Oak, Teak, Sapele): $40–$90 per square foot
Exotics and rift cut veneers are popular in higher-end modern projects. They bring a very specific grain and tone but come with long lead times and higher costs.
Hardware & Internal Organization
Hardware is easy to underestimate:
Standard Hinges and Slides: $2–$7 each
Premium Soft Close Hardware and Internal Organizers: $10–$50+ each
Once you add pull-out pantries, deep drawer organizers, corner solutions, spice pull-outs, trash systems, and tray dividers, hardware can add several thousand dollars to a full kitchen.
Worth it in day-to-day use, but it should be visible in the quote.
How Materials Typically Split The Budget
In a custom project, materials usually account for 25–50% of the total cabinet budget. The rest sits in fabrication, finishing, and installation.
Labor Costs: What It Takes To Get Cabinets Installed
Beautiful shop drawings still need skilled hands on site. Labor is a major part of the cost of custom cabinets.
Installation Labor Per Linear Foot
Typical installation pricing for custom cabinetry:
Basic straight runs on a relatively true wall – around $150–$200 per linear foot
More complex layouts with multiple heights, corners & details – $300–$450 per linear foot is common
This usually covers setting the bases, leveling and shimming, hanging uppers, adjusting doors and drawers, installing standard trim, and basic jobsite protection.
Hourly Carpenter And Installer Rates
Skilled finish carpenters often bill $65–$85 per hour.
Independent or specialty installers on high-value projects are often in the $75–$125 per hour range.
Rates shift up with schedule pressure, building rules, and how difficult access is.
Removing Old Cabinets & Hauling Away
Removal of old cabinets – typically $28–$59 per linear foot for demo and disposal.
Full demo including counters and backsplash – usually $1,000–$2,500 for a typical kitchen.
If there is mold, water damage, or old plaster behind cabinets, wall repair and remediation will sit on top of this.
Hidden & Supporting Costs Around Custom Cabinets
Cabinets rarely travel alone. They tend to bring other trades with them.
Electrical For Under-Cabinet & Task Lighting
Basic LED Under-Cabinet Lighting: $450–$1,200 per kitchen.
Multi-Zone, Dimming & Integrated Outlet Layouts: $1,200–$3,200+.
If the electrical panel is already overloaded, you may also be looking at panel work that sits in a separate budget.
Wall & Surface Repair
Standard Patch and Skim: $300–$950.
Major Drywall or Plaster Repair with Framing Corrections: $1,000–$2,500+.
This is common when old tile backsplashes come off or when prior work was not done cleanly.
Plumbing Shifts When Sink Cabinets Move
Minor Sink or Dishwasher Shifts on the Same Wall: $600–$1,500.
Major Rework Across the Room or in Slab: $4,000–$8,000+.
If you are planning a big island sink or relocating a main stack, this is where your cabinet project crosses into full remodel territory.
Appliance Panels & Integrated Fronts
Custom Panels for Panel-Ready Appliances: $500–$1,200 per panel, up to $2,500 for large or exotic veneer doors.
Full Appliance Walls with Multiple Integrated Fronts: $2,500–$5,000+.
These are beautiful when done right but should be named clearly in the quote.
Custom Hood Fabrication
Built-To-Order Wood or Metal Hoods: Typically $2,200–$7,000+, depending on size, shape, and finish.
Extra Millwork and Finishing Detail: Another $1,000–$2,500 in some projects.
Countertop Remeasuring & Recuts
Minor Retemplating for New Cabinet Lines: $400–$900.
Major Recuts or Expanded Layouts: $1,000–$2,500+.
If you are doing a proper custom cabinet package, you will usually budget new tops anyway, but it is worth knowing the numbers.
Timelines: How Long Custom Cabinets Take In Palm Beach
Money is one side of the equation. Time is the other.
Design & Selections
Most custom cabinet projects spend 2–4 weeks in design and selections.
Complex kitchens, projects with HOA or architectural review, or owners who want multiple options often stretch to 4–6 weeks.
Drafting & Shop Drawings
Once the design is approved, expect 1–3 weeks for final drafting and shop drawings.
Changes in appliances or layout after this point can reset the clock, so it pays to lock decisions before signing off.
Production Lead Times
Domestic Custom Shops: Usually 8–12 weeks, sometimes 14–16 weeks with complex finishes or backlogs.
Imported or European Lines: Commonly 14–20 weeks from order to delivery.
These timelines sit on top of any permitting or broader renovation schedule.
Installation Window
On-site installation for a typical kitchen is around 1–3 weeks of cabinet work, depending on:
Size of the space
Number of built-ins and details
How much electrical, plumbing, and wall work is happening at the same time
In a full home renovation, cabinet installation is one piece of a longer program, so calendar time can be longer even if the on-site days are similar.
How To Read & Compare Custom Cabinet Quotes
With all these moving parts, comparing three cabinet quotes on price alone rarely ends well.
Must Have Line Items In A Quote
Look for:
Box material (marine grade, standard plywood, MDF)
Door style and finish type with brand or spec level
Hardware brand and whether it is standard or premium soft close
Install scope, including trim and on-site adjustments
Demo and haul away, if included
Detailed drawings, accurately dimensioned
If you do not see these on the page, ask for them.
Common Omissions That Lead To Surprise Costs
No mention of electrical, plumbing, wall repair, or painting.
Vague language around “upgraded” finishes without explaining whether they are coastal grade.
Appliance panels or custom hood listed as “TBD” with no allowance.
Those are often where the budget grows once work has started.
Frequently Asked Questions
Are custom cabinets worth it compared to semi-custom in Palm Beach?
Often yes, especially in coastal homes where humidity, salt, and uneven walls expose weak construction quickly. Semi-custom works for simple layouts, but full custom gives better durability, fit, and long-term value.
Do custom cabinets increase home value in Palm Beach?
They can, particularly when paired with high-demand finishes like rift-cut white oak or modern slab fronts. Appraisers typically respond more to overall kitchen quality and cohesion than the cabinet label itself.
Ready To Map Out What’s Possible?
Clarity on design, details & execution in one conversation.
Conclusion
Custom cabinets in Palm Beach carry a wide range because every decision inside them carries weight – the door style, the finish, the box material, the hardware, the labor it takes to install them properly, and the extra electrical, plumbing, or wall work they pull into the project.
When you stack all of that together, the cost of custom cabinets becomes less about a single linear-foot number and more about how the pieces are planned, coordinated, and executed.
If you want custom cabinets planned with precise measurements, high-quality materials, and the coordination they need on-site, a discovery call is the ideal starting point. We’ll design the cabinetry, help select the finishes, and align everything with your contractor so the install goes smoothly and nothing is left to chance.
Pricing Disclaimer
The pricing figures referenced in this article are derived from an 18-month trailing analysis of projects completed by reputable contractors using quality materials and industry-standard construction practices. These figures are intended for general informational purposes only. Market conditions, material costs, labor rates, and contractor availability can change rapidly, and Palm Club Design Group makes no representation or guarantee that the prices cited reflect current costs or will apply to any future project. Readers should obtain up-to-date quotations from qualified professionals before making any budgeting or planning decisions.
